收藏本站
Serial Interface
Description
MASTER: The device that generates the serial clock.
SLAVE: Because the Serial Clock pin (SCK) is always an input, the AT25080/160/320/640
always operates as a slave.
TRANSMITTER/RECEIVER: The AT25080/160/320/640 has separate pins designated for
data transmission (SO) and reception (SI).
MSB: The Most Significant Bit (MSB) is the first bit transmitted and received.
SERIAL OP-CODE: After the device is selected with CS going low, the first byte will be
received. This byte contains the op-code that defines the operations to be performed.
INVALID OP-CODE: If an invalid op-code is received, no data will be shifted into the
AT25080/160/320/640, and the serial output pin (SO) will remain in a high impedance state
until the falling edge of CS is detected again. This will reinitialize the serial communication.
CHIP SELECT: The AT25080/160/320/640 is selected when the CS pin is low. When the
device is not selected, data will not be accepted via the SI pin, and the serial output pin (SO)
will remain in a high impedance state.
HO LD: The HOL D pin is use d in conjunctio n with th e CS pin to select th e
AT25080/160/320/640. When the device is selected and a serial sequence is underway,
HOLD can be used to pause the serial communication with the master device without resetting
the serial sequence. To pause, the HOLD pin must be brought low while the SCK pin is low.
To resume serial communication, the HOLD pin is brought high while the SCK pin is low (SCK
may still toggle during HOLD). Inputs to the SI pin will be ignored while the SO pin is in the
high impedance state.
WRITE PROTECT: The write protect pin (WP) will allow normal read/write operations when
held high. When the WP pin is brought low and WPEN bit is “1”, all write operations to the sta-
tus register are inhibited. WP going low while CS is still low will interrupt a write to the status
register. If the internal write cycle has already been initiated, WP going low will have no effect
on any write operation to the status register. The WP pin function is blocked when the WPEN
bit in the status register is “0”. This will allow the user to install the AT25080/160/320/640 in a
system with the WP pin tied to ground and still be able to write to the status register. All WP
pin functions are enabled when the WPEN bit is set to “1”.
6
AT25080/160/320/640
0675M–SEEPR–9/03
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
AT25DF321-SU IC FLASH 32MBIT 70MHZ 8SOIC
AT25F1024AN-10SU-2.7 IC FLASH 1MBIT 33MHZ 8SOIC
AT25F2048N-10SU-2.7 IC FLASH 2MBIT 33MHZ 8SOIC
AT25F4096W-10SU-2.7 IC FLASH 4MBIT 33MHZ 8SOIC
AT25HP512W2-10SI-2.7 SL383 IC EEPROM 512KBIT 10MHZ 16SOIC
AT26DF081A-SSU IC FLASH 8MBIT 70MHZ 8SOIC
AT26DF161-SU IC FLASH 16MBIT 66MHZ 8SOIC
AT26DF161A-MU IC FLASH 16MBIT 70MHZ 8QFN
相关代理商/技术参数
AT25640T2-10TC 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial E2PROMs
AT25640T2-10TC-1.8 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial EEPROMs
AT25640T2-10TC-2.7 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial EEPROMs
AT25640T2-10TI 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:SPI Serial EEPROMs
AT25640T2-10TI-1.8 功能描述:IC EEPROM 64KBIT 3MHZ 20TSSOP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:32 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (128K x 8) 速度:120ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:32-LCC（J 形引线） 供应商设备封装:32-PLCC 包装:管件 其它名称:AT49BV00112JC
AT25640T2-10TI-2.7 功能描述:IC EEPROM 64KBIT 3MHZ 20TSSOP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:32 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (128K x 8) 速度:120ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:32-LCC（J 形引线） 供应商设备封装:32-PLCC 包装:管件 其它名称:AT49BV00112JC
AT25640W-10SC-1.8 功能描述:IC EEPROM 64KBIT 3MHZ 8SOIC RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:378 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:8M（1M x 8，512K x 16） 速度:110ns 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:48-CBGA 供应商设备封装:48-CBGA（7x7） 包装:托盘
AT25640W-10SI-2.7 功能描述:IC EEPROM 64KBIT 3MHZ 8SOIC 制造商:microchip technology 系列:- 包装:管件 零件状态:停產 存储器类型:非易失 存储器格式:EEPROM 技术:EEPROM 存储容量:64Kb （8K x 8） 时钟频率:3MHz 写周期时间 - 字，页:5ms 存储器接口:SPI 电压 - 电源:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商器件封装:8-SOIC 基本零件编号:AT25640 标准包装:94